FINGER METER
ATTENTION: THE RING METER ONLY WILL WORK IF ALL STEPS BELOW WILL BE CORRECTLY FOLLOWED.
1 - Before printing this file, make sure that the page options ("reduce wide pages" or "adjust paper") are cleared in the print setup.
2 - Print the file.
3 - To make sure that the ring gauge will work properly, check with a ruler if the space at the top of the page measures 3cm (The measurement has to be accurate). If the measurement is not correct, double-check that all the page adjustment options are cleared in the print setup and print again.
4 - Take a ring that serves on the finger for which you want to buy the new piece and place it on the circles on the next page. Check to what extent the inner part of the ring fits. When you find the corresponding circle, you will have the measurement of your finger.
5 - If you prefer, you can trim the strip next to the specified measurement to confirm the measurement by closing the strip on your finger. Or, if you do not have a ring to confirm the measurement, you can trim the stripes and curl your finger until you find your measurement.
6 - If your measurement is less than 08 or greater than 24 (Portugal size), we ask you to select the largest measure in the "measurements" field and tell us the actual measurement using the "Order notes" field that appears during the purchase.